What is Max phase material?

Max-phase materials are a new type of machinable ceramic materials that have received extensive attention. Due to the metal-like bonding properties of the Max phase, it has the function of conducting electricity and heat. Most MAX phase materials have good electrical and thermal conductivity. This also has to do with electronic structure.

MAX phase (including Ti3SiC2, Ti2AlC, etc.) is a new type of machinable ceramic material that has attracted much attention.

Applications of Max phase materials

Max-phase materials are widely used in high-temperature structural materials, electrode brush materials, chemical anti-corrosion materials and high-temperature heating materials. Due to the unique nano-layered crystal structure, the MAX phase material is self-lubricating, has high toughness and electrical conductivity.

Supplier of Max phase materials

We provide high purity and ultrafine MAX phase powders, such as Ti3AlC2, Ti2AlC, Ti3SiC2, V2AlC, Ti2SnC, Mo3AlC2, Nb2AlC, V4AlC3, Mo2Ga2C, Cr2AlC, Ta2AlC, Ta4AlC3, Ti3AlCN, Ti2AlN, Ti4AlN3, Nb4AlC3, etc. Email us or click the desired product to send an inquiry.

Payment Term:

T/T, Credit Card, Western Union, Paypal etc.

Term for delivery:

By air, courier or by sea according to the needs of the customer.

Conditions of storage:

1.) Maintain a dry area at the temperature of room.

2.) Avoid high and damp temperatures.

3.) Utilize immediately following the opening of the bag inside.

The main application of titanium diboride TiB2 powder

Titanium diboride (TiB2) is the most stable compound among boron and titanium, and is mainly used for the preparation of composite ceramic products.

The production process of chromium carbide

Chromium carbide powder is a high melting point inorganic material with good wear resistance,It is used as a thermal spray material for metal surface protection and is also often used as hard alloy.

Properties of Potassium Stearate

Potassium stearate is a fine white, fluffy powder. It has a smooth feel, no sand, and has a fatty smell. It is soluble in hot water or alcohol.

Why is Polycarboxylate Superplasticizer Modified?

Concrete water reducing agent is one of the technical ways to reduce the cement dosage, improve the utilization rate of industrial waste residue, and realize the durability and high performance of concrete.

What are Early Strength Agents?

Early strength agent is an admixture which accelerates the development of concrete early strength and has no significant effect on later strength.

What are Common Metal Alloys?

An alloy is a mixture of chemical elements, at least one of which is metal.

Analysis of the causes of concrete slump loss

Whether the cement used and the pumping agent are matched and adapted must be obtained through the adaptability test. The optimum amount of the pumping agent should be determined through the adaptability test with the cement cementitious material.

What is Metal Powder Material for 3D Printing

Metal 3D printing is a 3D printing technology that uses metal powder to directly print metal parts, also known as metal powder sintering (SLM).

What is Aluminum Nitride AlN Powder?

Russia and Ukraine is an important exporters of oil, natural gas, metals, fertilizers, rare gases and other industrial raw materials. Affected by the further intensification of the tension of the war, the global market has become more worried about t

Common problems in the use and maintenance of lithium batteries

The lithium-ion battery has a nominal voltage of 3.7V (3.6V) and a charge cut-off voltage of 4.2V

Microsilica Fume

Micro-silica is finely processed from silicon dioxide (SiO2), also known as quartz, through crushing, purification, grinding, grading and other processes. It has high purity, white color, and reasonable particle size distribution. It has unique prope

Introduction to Concrete Additives (2)

In this article, the set retarder, the air-entraining agent, and the accelerating agent are going to be talked about.